Low MOQ Bag Manufacturing From 50 Pieces
Most factories quote a 500 or 1,000 piece minimum. Our atelier produces from 50 pieces per design, and you can mix colourways inside that 50. It is a real production run on the same line, with the same golden-sample approval and AQL 1.5 inspection as a bulk order.
A low MOQ bag manufacturer has to absorb changeover time that a large run spreads across tens of thousands of pieces. We keep the same line, the same approvals and the same inspection standard, and price the changeover into the tier instead. Low MOQ bags are not samples: the first 50 pieces are production.
How the 50-piece minimum works
- 50 pieces per design, mixable across up to 5 colourways of the same silhouette.
- Same production line and same QC as a 5,000-piece order — this is not a sample service with retail packaging.
- Scale-up pricing: unit cost drops at 200, 500 and 1,000 pieces, and your sample fee is refunded in full once you reach 200.
- Reorders stay open: we keep your golden sample and embroidery files so a repeat run needs no new sampling fee.
Who this is built for
What a 50-piece run really costs
A small run carries the same fixed work as a large one: pattern grading, embroidery digitising, a sealed sample, line setup, and label and carton tooling. On a five-thousand-piece order those costs spread across thousands of units. On fifty, they concentrate, which is the whole reason a low MOQ unit price is higher. The per-bag material and labour cost barely moves.
The practical consequence is that the second and third order get cheaper, not because we renegotiate, but because grading, digitising and tooling are already sunk. Brands that plan three seasonal drops on one silhouette usually average a noticeably lower unit cost than brands that order the same total volume across three unrelated shapes.
One caveat worth planning around: the 50-piece floor is per design, not per order. Two styles at 25 pieces each is not a 50-piece run, because each style still needs its own grading, its own digitised programme and its own sealed sample.
Quick Answers: MOQ, Sampling & Lead Times
Short, self-contained answers to the questions buyers ask most about this programme.
- Is a 50-piece order production or sampling?
- Production. It runs on the same line, with the same sealed-sample approval and the same AQL 1.5 inspection as a bulk order. The only difference is that the fixed setup cost is concentrated on 50 units instead of 5,000.
- Can we split colourways inside the 50 pieces?
- Yes. A typical first order is 25 pieces in one colourway and 25 in another, which is enough to test two palettes with real shoppers before committing to a seasonal buy. Label barcodes are set per colourway so the split stays clean in your ERP.
- Why is the sample fee refundable?
- Because the sample is development work, not a product we sell. Once the order reaches 200 pieces the sample fee is credited in full against the invoice, so a brand that goes ahead pays only for production. If the programme stops at the sample, the fee simply covers the development cost.
- Do you accept orders below 50 pieces?
- For a first order, 50 pieces per design is the floor, because below that the line setup and inspection cannot be run properly. If you need fewer units to show buyers, order one sealed sample set of two or three colourways instead and convert to production once the range is confirmed.
Production & Customization FAQ
Is 50 pieces really enough?
Yes. Embroidery setup and fabric minimums make smaller quantities uneconomic, which is why 50 is our floor — but it is a genuine production run, not a sample.
Can I mix different designs in one order?
Colours mix freely within the 50-piece minimum. Different silhouettes each carry their own 50-piece minimum, because each needs its own pattern and embroidery setup.
Do small orders cost much more per unit?
Unit cost is higher at 50 pieces than at 1,000, mainly because embroidery setup and pattern grading are amortised across fewer units. We show the full tier table upfront so there are no surprises.